Low Voltage Power Factor Improvement Capacitor

Low Voltage2

YESHA ELECTRICALS PVT.LTD., backed by R & D and a highly experienced team of internationally trained engineers, give you the real low loss SOGGY FOIL- POLYPROPYLENE FILM CAPACITOR, the latest in power capacitor technology. This Technology gives greater emphasis to lower losses, high operating efficiency,   reliability and Compact size.

Unique Advantage : Since the active dielectric in this design is polypropylene film, its Capacitance per unit volume and field strength are for greater and the dissipation factor far smaller than those of other mixed dielectric type capacitors.

Low Loss : These capacitors have a dielectric loss of less than about 0.2 watt per KVAr. This ensures low operating cost, low temperature rise and longer life of the capacitor.Low Voltage

Non – Pollutant : The use of non-polluting electric fluid is a further advantage from the environmental point of view, making redundant the stringent disposal regulations applicable to chlorinated diphenyl impregnated paper capacitors.

Capacity : 0.5 to 25 KVAr Units.
Voltage : 200 to 1000 Volts.
Frequency : 50 to 60 Hertz.

Technical DataSoggy Foil – Polypropylene Film Power Factor Improvement Capacitor.

Voltage Range 200 – 1000 V AC
Frequency 50 – 60 Hz.
Phase Single or Three Phase
Rated KVAr 1 ,2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 12.5 , 15 , 20 & 25 KVAr [ other rating upon request ]
Bank Ratings Banking is done as required.
Temperature Category 50 Degree Celsius Ambient.
Fuse Suitable external HRC fuses provided
Discharge Resistors Suitable external discharge resistors provided
Terminal Cover Suitable terminal cover provided
IS Standard All capacitors conform to IS – 13585 (Part I)-1994.

Capacitors can be manufactured to your specifications to suit any purpose.